Minelab VANQUISH 340 User Manual

5
CONTENTS
Display
1. Battery Level
Indicates the current battery level (page 10)�
2. Volume Level
Displays the detector audio volume (page 6)�
3. Sensitivity Level
Displays the Sensitivity level (page 6)�
4. Target Identification Number
Indicates the numerical value of a detected target, allowing the identification of an object
before digging� For example, a US quarter will always display the same Target Identification
(ID) Number�
Negative numbers are ferrous, positive numbers are non‑ferrous from fine gold (low ID’s) to
large silver (high ID’s)�
5. Depth Gauge
Shows the approximate depth of a detected target (page 7)�
6. Search Modes
Displays the active Search Mode (page 3)�
7. Discrimination Segments
Represents groupings of Target Identification Numbers as a single segment on a scale�
Discrimination Segments align with the Target Identification Guide�
7
6
5432
1

Minelab VANQUISH 340 Specifications

General

Technology	Multi-IQ
Waterproof Coil	Yes
Audio Output	Built-in speaker and 3.5mm headphone jack
Search Modes	3 (Coin, Jewelry, All Metal)
Discrimination Segments	5
Target ID	-9 to 40
Display	LCD
Audio Tones	3
Sensitivity Adjustment	4 levels
Ground Balance	Automatic
Weight	1.2 kg (2.6 lbs)
Battery Type	4 x AA
Operating Frequency	Multi-IQ
Length	1450 mm (57")
Battery Life	Approx. 10 hours