MINIWARE DT71 - Page 8

Screen will display
LA" on lower left corner;
Automatic 8
Identif f ade Can automatically
y measure resistance/
inductance/capacitance
[Diode
Output sine wave,
hade default 10KHz
Output noise wave For frequency
NOISE 100KH Ô
Signal ú default 100KHz modification
Signal Gen generator options, see
mode Output user-defined configuration file
USER 2KHz wave, default 2KHz description P13
Output pulse wave,
PULSE TOKHzZ |__ default 10KHz
Calibration #0 Closed (short-circuit)
Close Tips Pls! tweezer tips
Calibration es Please refer to P12
Calibration #1
Open Tips Pls!
Open (open-circuit)
the tweezer tips