MINN KOTA Riptide Ulterra User Manual

32 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
CHANGE THE PROP ORIENTATION
h. Once in the proper orientation, lower the Trim
Housing and Shaft onto the Steering Housing.
i. Let the Trim Release Handle move back in place.
Trim Housing
Trim Housing
Trim Release
Handle
Trim Release
Handle
Steering
Housing
Shaft
j. Reconnect the Power Cables to the battery and
make sure the breaker, if equipped, is turned “on”.
Turn the motor “on”.
k. Stow the motor using the Stow/Deploy Button on the
Foot Pedal or using the i-Pilot or i-Pilot Link remote
to check the orientation of the Prop.
Power Cables
6
7
6h
6i
7j
7k
WARNING
When stowing or deploying the motor, keep fingers clear of all
hinges, pivot points and all moving parts. When stowing and
deploying the motor, ensure that it doesn’t contact the boat,
trailer, or any other obstruction.

MINN KOTA Riptide Ulterra Specifications

General

Auto Stow/Deploy	Yes
Power Trim	Yes
Saltwater Use	Yes
Blade Material	Composite
Deploy/Stow	Automatic
Spot-Lock	Yes
Thrust	80 lbs
Voltage	24V
Shaft Length	45"
i-Pilot Link	Yes
i-Pilot	Yes
Remote Control	Wireless