MINN KOTA Riptide Ulterra User Manual

minnkotamotors.com | 39
©2019 Johnson Outdoors Marine Electronics, Inc.
MANUALLY STOWING THE RIPTIDE ULTERRA
Right
Sideplate
Screw
Screw
l. While the motor is in the stowed position, use a #3
Phillips Screwdriver, to replace the Right Sideplate,
if desired. Do this by replacing the two screws that
hold the sideplate in place.
7

MINN KOTA Riptide Ulterra Specifications

General

Auto Stow/Deploy	Yes
Power Trim	Yes
Saltwater Use	Yes
Blade Material	Composite
Deploy/Stow	Automatic
Spot-Lock	Yes
Thrust	80 lbs
Voltage	24V
Shaft Length	45"
i-Pilot Link	Yes
i-Pilot	Yes
Remote Control	Wireless