Minolta DiMAGE 7Hi - Display Mode; Direct Manual Focus

124
125S
ETUP MODE
DISPLAY MODE DIRECT MANUAL FOCUS
Standard display Focus frame only
Live image only
Real-time histogram
ScaleGrid
Setup
Folder name
Select folder
New folder
Display mode
Std. display
Focus frame
Histogram
Grid
Scale
Direct MF
Image only
The recording mode
displays activated by
the display-information
button (p. 41) can be
selected in the
advanced 1 section of
the setup menu. The
display cycle is the
same as the order
shown on the menu.
Display-mode settings with a check mark are included in
the display cycle. To change displays used, highlight the
setting using the controller, and then press the right key
(1) to check or uncheck the box.
1
Direct manual focus allows manual adjustments to be made after the AF system has
locked onto the subjects. Direct manual focus is activated in the advanced 1 section of
the setup menu (p. 118). Direct manual focus is canceled when continuous AF (p. 83)
or manual focus (p. 43) is in use.
1
As described in the basic recording operation
section (p. 27), press the shutter-release button
partway down to lock the focus and exposure (1);
the shutter speed and aperture display will turn
black and the focus signal will turn white. “DMF”
will be displayed next to the drive-mode indicator.
The camera can be manually focused until the
shutter button is released. The approximate
focusing distance is displayed next to the frame
counter.
Electronic magnification (p. 95) can be used by
pressing the focus mode button (2) or the
display-information button (3) while direct manual
focus is active. The magnification button can be
used if electronic magnification is selected in the
magnification-button option in the advanced 1
section of the recording-mode menu.
2
Basic Adv.1
Adv.2
Cust.
File # memory
3