EasyManua.ls Logo

Minolta DiMAGE F300 - Installing AA Batteries; Attaching the Hand Strap

Minolta DiMAGE F300
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
When the supplied CR-V3 battery is exhausted please use two AA-size Nickel Metal Hydride (Ni-MH) bat-
teries. We do not reccomend the use of Alkaline or Lithium AA batteries. Ni-MH batteries offer improved
performance partiucally when charged with an ‘intellegent’ charger. Intellegent chargers recharge each bat-
tery with the amount power it requires.1800mAh or higher capacity batteries are reccomended.
Installing AA batteries
Install the AA batteries as shown in the diagram; make
sure the positive and negative battery terminals are ori-
ented correctly.
Always keep the strap around your wrist in case the camera is accidentally
dropped. An optional metal chain neck strap, NS-DG100, and leather neck
strap, NS-DG200, are also available from your Minolta dealer. Availability
varies with region.
Attaching the hand strap
Pass the other end of the strap through the small loop
and tighten (2).
2
1
Pass the small loop of the hand strap through the strap
eyelet on the camera body (1).

Table of Contents

Related product manuals