87
LANGUAGE
The language used in the menus can be changed. The language is selected in the basic section of
the setup menu (p. 84).
DISPLAY MODE
Standard display Focus frame only
Live image only
Real-time histogram
ScaleGrid
Setup
Basic Custom1 Custom2
LCDbrightness
Format
Power save
Language
Display mode
Std. display
Focus frame
Histogram
Grid
Scale
Image only
The recording mode
displays activated by the
display button (p. 37) can be
selected in the basic section
of the setup menu. The
display cycle is the same as
the order shown on the
menu.
Display-mode settings with a check mark are
included in the display cycle. To change displays
used, highlight the setting using the controller, and
then press the right key (1) to check or uncheck
the box. Press the controller to set the selected
displays (2).
1
2
To Next Page
Loading...
