Minolta Dimage X20 - Page 17

17
Turn the strap eyelet so
that the strap A can
pass through it.(1)
Pass the small loop of strap A
through the strap eyelet on the
camera body (2).
Pass the other end of the strap through the
small loop and tighten (3).
Using strap A
Using both straps A and B
1
2
3
Pass the small loop of
strap B through the other
strap eyelet or the loop of
strap A (1).
Pass the end of strap B
through the link of the strap
A (2).
Pass the tip of strap B
through the buckle and pull
to tighten (3).
Slide the holder ring over
the tip (4).
1
1
2
3
4