DRIVE MODES
Single-frame advance - to take a single image each time the shutter-
release button is pressed. This is the camera’s default setting.
Self-timer - to delay the release of the shutter (p. 39). Used for self-
portraits.
Continuous advance - to take multiple images when the shutter-release
button is pressed and held (p. 40).
Self-portrait - to take a self-portrait using the self-portrait mirror on the
front of the camera (p. 41).
Multi frame - to capture a series of nine thumbnails within an image when
the shutter-release button is pressed once (p. 41).
The drive modes control the
rate and method images are
captured. Indicators indicating
the selected drive mode
appear on the monitor. The
drive mode is selected in the
main menu of the recording-
mode (p. 34). If auto reset (p.
52) is active, the drive mode is reset to single-frame
advance when the camera is turned off.
38 RECORDING - ADVANCED OPERATION
To Next Page
Loading...
