EasyManua.ls Logo

Minolta Dimage X20 - Multi Frame; Self-Portrait

Minolta Dimage X20
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
In multi frame, pressing the shutter release
button once captures a series of nine thumbnail
images and creates one image. Multi frame can
be selected in the drive mode section of the
recording-mode main menu (p.34).
During the exposure, the indicator lamp on the front of the
camera glows. Flash is canceled automatically. It is
recommended that multi-frame mode is used when there is
enough light to get a well-exposed picture. ShtterFX is
disabled (p.87).
Multi frame
Use this mode to take self-portraits using the self-portrait mirror on the front
of the camera. The camera adjusts its focus not to exceed 1m/3.3 feet, and
its focal length to wide-angle setting automatically.
Self-portrait can be selected in the
drive mode section of the recording-mode main
menu (p.34).
Self-portrait
Look at the self-portrait mirror on the front of the camera
to confirm the framing (1). Adjust the focal length with up
or down keys if its necessary. Press the shutter-release
button partway down, the indicator lamp will glow when
the focus is confirmed (2). Press the shutter-release
button all the way down to take the picture (3). Indicator
lamp will blink after exposure to indicate the release was
completed.
1
2
Mirror
indicator lamp

Related product manuals