DETAILED
OPERATION
89
While is blinking on the
data panel, press the shutter-
release button all the way
down to take the last
exposure.
• Multiple-exposure mode is cancelled
after the last exposure has been
taken.
• The film will be advanced to the next
frame.
Taking last exposure
Taking more than 2 exposures
While pressing the function
button, turn the control dial
one click counterclockwise to
stop the from blinking.
Press the shutter-release
button to take the picture.
Repeat 4 and 5 for each
additional exposure.
5
6
4
7
88
MULTIPLE EXPOSURE
Turn the function dial to .
While pressing the function
button, turn the control dial
until appears on the
data panel.
Press the shutter-release
button all the way down to
take the first exposure.
• blinks on the data panel
indicating the next exposure will be
the last in the series.
• Go to step 7 when making only 2
exposures.
The multiple-exposure function makes
it possible to expose two or more
images on the same frame.
• Flash cannot be used with multiple
exposure.
3
2
1
To Next Page
Loading...
