FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
M-72
1174SBM2300A
If the copier is configured with an optional Sorter or Staple Sorter, or Duplex Unit (installed
intheCabinet),theExit/DuplexSwitchingUnitmustbefittedtotheexitsectionofthe
copier.
The Master Board outputs a signal to energize the Exit/Duplex Switching Solenoid, which
switches the position of the Exit/Duplex Switching Plate. The Unit has a 2nd Paper Exit
Sensor built into it which detects a sheet of paper being fed out of the Unit. (For more
details of switching control, see the Service Manual for “DUPLEX UNIT.”)
23 EXIT/DUPLEX SWITCHING UNIT (OPTION)
1139M081AA
Exit/Duplex Switching Plate
Drive Transmitting Gear
(coupled to a gear in the
Exit Section of the copier)
1139M082AA
Paper Exit Roller/Rolls
2nd Paper Exit Sensor PC30
Exit/Duplex Switching Solenoid SL61
Exit/Duplex Switching Plate
To Next Page
Loading...
