FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 MECHANICAL/ELECTRICAL
98.04.24
M-73
1174SBM2400A
To prevent image transfer efficiency from being reduced due to damp paper in highly humid
weather, a Paper Dehumidifying Heater is installed on the base frame of the copier under
the 2nd Drawer.
A Drum Dehumidifying Heater is located under the Lower Guide Plate to prevent the PC
Drum from forming condensation.
Both Drum and Paper Dehumidifying Heaters are ON when the Dehumidifying Switch is
ON and the power cord plugged in. They are OFF it the Dehumidifying Switch is OFF.
24 DEHUMIDIFYING SWITCH (OPTION)
1174M013AC
Drum Dehumidifying Heater H2
Lower
Synchronizing
Roller
Dehumidifying
Switch S3
1149M023AA
Base frame
Paper Dehumidifying Heater H3
To Next Page
Loading...
