Minolta EP2030 - Page 104

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
M-10
ON
Scanner Motor
Image Erase Lamp LEDs ON/OFF control is started.
OFF
Scanner Reference Position Sensor
ON
Synchronizing Roller Clutch
ON
Paper Transport Clutch
Approx. 0.5
Approx. 0.2
Approx. 0.5
1
ON
All LEDs of Image Erase Lamp ON
Scanner starts return motion.
Scanner Reference Position Sensor
ON
✽ For A4 crosswise, ×1.000
OFF
Exposure Lamp
SCEND signal: LOW
Approx. 0.2
Approx. 0.3
Approx. 0.3
Approx. 0.6
F A scan motion is completed.