Minolta EP2030 - Cpm Copier

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-4
✽
For more details, see the “Operator’s Manual” shipped with the copier.
2-2. 18 cpm Copier
1. 10-Keys
•
Numeric keypad used for setting the num-
ber of copies to be made, and Tech.
Rep. mode settings.
2. Clear Key
•
Clear the number-of-copies setting,
choice modes setting.
3. Energy Saver Key
•
Sets the copier into the Energy Saver
mode.
4. Panel Reset Key
•
Resets the copier to the initial mode.
5. Stop Key
•
Stops a multi-copy cycle or a test (F
✽
)
operation.
6. Start Key
•
Starts a multi-copy cycle or a test (F
✽
)
operation.
7. Zoom Ratio Select Key
•
Selects a fixed zoom ratio.
8. Zoom Up/Down Keys
•
Changes the zoom ratio manually.
9. Auto Exposure Mode Key
•
Selects either the Auto or Manual Expo-
sure, or Photo mode.
10. Exposure Control Keys
•
Selects the exposure level.
11. Paper Select Key
•
Selects the paper source.
12. Book Key
•
Selects the Book mode.
13. Finishing Mode Select Key
•
Selects the Sort mode.
14. Auto Size Key
•
Selects the Auto Size mode.
15. Drum Dehumidify Key
•
Runs a Drum Dehumidify cycle.
16. Auxiliary Toner Replenishing Key
•
Starts an auxiliary toner replenishing
sequence.
17. Meter Count Key
•
Gives a display of the current copy count.