Minolta EP2030 - Specifications of EP1085

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
G-4
1174SBG0102A
COPY MEDIUM
❍
: Permissible
–
: Not permissible
1-2. Specifications of EP1085
TYPE : Desktop (with Stationary Platen)
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indirect Image Transfer to Plain Paper
PAPER F EE DING
SYSTEM
: 2-Way Feeding Paper Drawer: Universal Tray
(250 sheets of paper)
Manual Bypass Table
EXPOSURE SYSTEM : Mirror Scanning, Slit Exposure
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
tem
IMAGE TRANSFER
SYSTEM
: Visible Image Transfer by means of a Single-Wire DC Neg-
ative Corona with Corotron System
PAPER SEPARATING
SYSTEM
: AC Corona with Corotron System, plus Paper Separator
Finger
FUSING SYSTEM :
Heat Roller
PAPER DISCHARGING
SYSTEM
: Charge Neutralizing Brush
MAXIMUM ORIGINAL
SIZE
: Metric-A3L; Inch-11”
×
17”L (L: Lengthwise)
Paper Drawer
(Automatic feeding)
Manual Bypass
(Single-sheet feeding)
Medium
Plain paper
(60 to 90 g/m²)
❍❍
Translucent paper –
❍
Transparencies –
❍
Thick paper
(91 to 157 g/m²)
–
❍
Recycled paper
❍❍
Dimensions
Maximum
(Width
×
Length)
297
×
432 mm 297
×
432 mm
Minimum
(Width
×
Length)
140
×
182 mm 100
×
140 mm