FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-18
16. Remove three screws and the Solenoid Mounting
Bracket.
1139D108AA
1139D109AA
17. Unplug one solenoid connector.
18. Unplug one photosensor connector and remove
the harness from the clamp.
1139D110AA
NOTE
When reinstalling the Solenoid Mounting Bracket,
make sure that the Solenoid is in the deenergized
position.
19. Snap off the two C-clips to remove the Paper Take-
Up Roll Unit.
1139D111AA
1139D112AA
20. Snap off the three C-clips to remove the Paper
Feed Roll.
To Next Page
Loading...
