D-17
(4) Cleaning of the Vertical Transport Rollers
1134D016AA
(5) Removal of the Drawers
*Though the following steps and illustrations are for the 1st Drawer, the same procedure applies also to
the 2nd Drawer.
<Except 120V Areas>
1156D020AA
1134D133AA
1134D143AA
1. Remove the Right Door, Right Cover, and Rear Cover.
2. Using a soft cloth dampened with alcohol, wipe each roller
clean of dirt.
1. Slide out the drawer and remove one screw and the right
stopper.
2. Remove one screw and the left stopper.
3. Remove the drawer from the copier.
To Next Page
Loading...
