D-87
(11) Adjustment of the Leading Edge Registration for Book Second Page
z
Requirement
1136D036AA
z
Important
This adjustment should be made after the “adjustment of the leading edge registration”.
1136D037AA
2. On the Basic screen, touch Origi.
"
Copy ; then, select
Separation
.
1156D140CA
1156D158CA
3. Select
Book
"
1
and make three single copies on A4 crosswise paper at full size (
⋅
1.000)
mode. Check the third copy for the leading edge registration. (If the dimensions deviate from the speci-
fications, perform the following steps to make the adjustment.)
1156D161CA
D
Dimension A on the copy of a test chart (A3 or 11”
⋅
17”) as
shown on the left should measure 20 3.0 mm and B equals
C.
D
Setting range: 45 to 55
1. Place the test chart face down on the Original Glass and
align its rear left corner with the reference marker on the
Original Width Scale. Then, lower the Original Cover.
To Next Page
Loading...
