D-83
(2) Leading Edge Registration in Enlargement Mode
z
Important
This adjustment should be made after the “adjustment of leading edge registration in the full size
mode”.
1136D034AA
2. With the “Adjust 1/2” menu on the screen, touch
Next
to show the “Adjust 2/2” menu.
3. Touch the select key
!
or
"
to highlight “A11 Scan Regist Enlargement”.
1156D156CA
1156D166CA
1. After the leading edge registration in the full size mode has
been adjusted, make three single copies on A3 or 11”
⋅
17” paper at
⋅
2.000 and check the 3rd copy for leading
edge registration.
(If the registration is up to the specifications, go to the ad-
justment in the reduction mode. If it deviates from the spec-
ifications, perform the following steps to make the adjust-
ment of leading edge registration in the enlargement
mode.)
To Next Page
Loading...
