D-55
1156D082AA
1156D083AA
1156D084AA
1136D217AA
1156D085AA
14. Remove the harness from the Harness Guide.
15. Unplug the connectors of the two Thermistors.
16. Remove one screw, shoulder screw, and the Harness
Guide.
17. Remove one screw and the Thermoswitch cord.
18. Remove two screws and the Temperature Detector Assy.
NOTE
When reinstalling the Temperature Detector Assy, be
sure that both ends of the assy are in tight contact with
the frame.
19. Remove the Gear.
20. Remove two shoulder screws and the Fusing Unit En-
trance Guide Plate.
To Next Page
Loading...
