Minolta Maxxum 8000i - Manual Start of Film Rewind.19; Operation in Detail; Focus

The film leader will be wound all the way into
the cartridge. If you want the film leader to
be left out after the film is rewound, you can
use the Customized Function Card to change
this function. See p. 64 for more details
about this and other Creative Expansion
Cards.
If you accidentally open the camera back
before the film is rewound, close it imme¬
diately. Press the rewind button to finish
rewinding the film. Light falling on the film
will ruin many of the pictures, but your quick
action may save a few.
Manual Start of Film Rewind
You can also rewind and remove a roll of film
before the last picture is taken. To start film
rewind manually, simply open the card door on
the right side of the camera and press the
rewind (<S) button.
19
OPERATION IN DETAIL
Focus
Exposure
Metering
Film Advance
Exposure Options
Additional Information
20