Minolta Maxxum 8000i - GETTING STARTED; Preparing the Camera; ATTACHING AND REMOVING THE LENS

GETTING STARTED
Preparing the Camera
Basic Operation
5
1. PREPARING THE CAMERA
ATTACHING AND REMOVING THE LENS
To attach:
1. Remove the body and rear lens caps, as
shown.
When attaching or removing lenses, be care¬
ful not to touch anything inside the camera,
especially the lens contacts or mirror. To
protect the lens contacts and elements, at¬
tach the lens caps wheneverthe lens is not in
use.
2. Align the red bead on lens barrel with the red
dot on camera's lens mount Insert the lens
bayonet into the mount and turn the lens clock¬
wise until it locks in place with a click.
If lens is not attached properly, — appears in
the data panel's aperture display when cam¬
era is switched on.
6