EasyManua.ls Logo

Minolta MAXXUM DYNAX FLASH 3200I - PART 2 - Care and Storage

Minolta MAXXUM DYNAX FLASH 3200I - PART 2
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARE AND STORAGE
Keep flash unit away from water and
other liquids. Never handle unit with wet
hands.
Flash unit may not operate satisfactorily
at temperatures above 50° C (120° F) or
below
_woe
(15°F).
Never fire flash at close range into the
eyes of people or animals.
When dirty, flash unit may be wiped with
a clean dry cloth. Do not allow alcohol or
other chemicals to touch surfaces.
Never subject flash unit to shock, high
heat, or high humidity. Be particularly
careful not to leave it in the glove compart-
ment or other places in motor vehicles where
it may be subjected to high temperatures.
When storing flash for more than two
weeks, remove the batteries and keep flash
in a cool, dry place away from dust or
chemicals.
Never attempt to disassemble the flash.
Any repairs should be done by an authorized
Minolta service facility.
Fire flash several times a month to keep it
in good operating condition.
To assure prompt service, contact your
nearest authorized Minolta service facility
before shipping your flash unit.

Related product manuals