13
To exit the settings menu, press the MENU button and your camcorder will return to the
main status screen of the current mode.
4.1.13 Image Stabilization
This setting enables image capture in shaky or low-light settings by electronically
eliminating motion blur and canceling shake.
1. In VIDEO or PHOTO modes, press the MENU button. Select ‘Image Stabilization’ by
using the UP or DOWN buttons.
2. Press the OK button to turn Image Stabilization on or off, a check indicates that the
option is activated.
To exit the settings menu, press the MENU button and your camcorder will return to the
main status screen of the current mode.
4.1.14 Quick Review
This setting allows you to review the photo after it’s taken before returning back to Photo
Mode.
1. In VIDEO or PHOTO modes, press the MENU button. Select ‘Quick Review’ by using
the UP or DOWN buttons. Press the OK button to enter the ‘Quick Review’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 2 seconds and 5 seconds.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button and your camcorder will return to the
main status screen of the current mode.
4.1.15 Date & Time Stamp
This setting allows you to imprint a date & time onto your recorded video files. Once a
video file is recorded with the imprint, the imprint cannot be removed.
1. In VIDEO or PHOTO modes, press the MENU button. Select ‘Date & Time Stamp’ by
using the UP or DOWN buttons. Press the OK button to enter the ‘Date & Time Stamp’
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button and your camcorder will return to the
main status screen of the current mode.
4.1.16 Date & Time Setup
This setting allows you to set a date and time for display on videos and photos.
To Next Page
Loading...
