4
1.3 Memory Card Insertion and Removal
1. Ensure the camcorder is powered off.
2. Insert a MicroSD memory card into the MicroSD card slot with the gold pins facing the
display screen. Do not force it through the MicroSD card into the slot as it can only be
inserted in one direction. Once successfully inserted, it will click in.
3. To remove the MicroSD card, simply push the MicroSD card in and it will bounce back
out of the slot.
1.4 Windshield Mount
The windshield mount is included for mounting your camcorder to your windshield. Simply
attach the smaller plastic end of the mount to the top of your camcorder, make sure that
the red tape covering can be seen when looking at the front of the camcorder. When
picking the spot to mount the camcorder, power the camcorder on and test the location on
the windshield. This will allow you to pick the spot where the camcorder does not block
your view while driving and where the camcorder has the best view of the road. Once you
choose the best location, make sure that your windshield is clean and free of any dirt or
debris. Then peel off the red adhesive covering on the mount and press firmly onto your
windshield and hold the mount for 30 seconds to ensure a strong bond.
To Next Page
Loading...
