3
1.2 Button and Functions Explanation
Shows the current view and menu, options and different
statuses of each mode.
Press and hold for 3 seconds to power on and off.
Tap once while power is on to turn on the LED light, tap
again to turn the LED light off.
Tap once to cycle between Video, Photo and Playback
modes. Press and hold to access settings menus in
each mode.
Button used during menu navigation and playback use.
Tap to turn audio recording on and off in video mode.
OK button in menus.
Record button in shooting modes.
Button used during menu navigation and playback use.
Tap to change the view on the LCD Display.
Built-in microphone for audio capture during video
recording.
Power port and data transfer port for transferring media
to your computer.
IR LEDs to aid with night vision.
Mount used to connect the camcorder to your
windshield.
Storage slot for inserting your MicroSD memory card.
Built-in speaker output for playback of video files when
audio recording is enabled.
Front capture device for all video and photo.
Button for power cycling your camcorder if it freezes or
becomes unresponsive
To Next Page
Loading...
