10
1. In VIDEO mode, press the MENU button. Select ‘Loop Recording’ by using the UP or
DOWN buttons. Press the OK button to enter the ‘Loop Recording’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 1 Minute, 3 Minutes and 5 Minutes.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.1.3 Exposure
This function adjusts the frame brightness in your video.
1. In VIDEO mode, press the MENU button. Select ‘Exposure’ by using the UP or DOWN
buttons. Press the OK button to enter the ‘Exposure’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from +2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3,
and -2.0.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.1.4 Motion Detection
This setting automatically begins recording if movement is detected in front of the camcorder
lens. Once recording, the camcorder will stop recording if not further movement is detected
within a 10-second period of the last movement registered. You may also manually stop
recording anytime by pressing the OK button during a recording.
1. In VIDEO mode, press the MENU button. Select ‘Motion Detection’ by using the UP or
DOWN buttons. Press the OK button to enter the ‘Motion Detection’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
Note: When selecting OFF, your camcorder will still automatically record upon startup if
you power it off.
To Next Page
Loading...
