19
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button once and your camcorder will return to the
main status screen of the current mode.
4.4.6 Language
This setting allows you to set the language for your camcorder’s menus.
1. In any mode, press the MENU button twice. Select ‘Language’ by using the UP or
DOWN buttons. Press the OK button to enter the ‘Language’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from several different languages.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.4.7 Frequency
This setting allows you to set the power frequency of your camcorder. This setting is
dependent on the region that the camcorder is being used in.
1. In any mode, press the MENU button twice. Select ‘Frequency’ by using the UP or
DOWN buttons. Press the OK button to enter the ‘‘Frequency’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from 50Hz and 60Hz. The setting for North America is 60Hz.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button once and your camcorder will return to the
main status screen of the current mode
4.4.8 IR Night Vision
This setting controls the IR LED light for your camcorder.
1. In any mode, press the MENU button twice. Select ‘IR Night Vision’ by using the UP
or DOWN buttons. Press the OK button to enter the ‘IR Night Vision’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button once and your camcorder will return to the
main status screen of the current mode.
To Next Page
Loading...
