18
3. Press the UP or DOWN buttons to change the any of the values of the date and time.
When you are satisfied with the highlighted value, press the OK button to confirm that
value and proceed to the next value.
Once you are completed, press the MENU button once to save your setting and exit. Your
camcorder will return to the main status screen of the current mode.
4.4.3 Auto Power Off Delay
This setting allows you to set the length of time before the camcorder powers off
automatically.
1. In any mode, press the MENU button twice. Select ‘Auto Power Off Delay’ by using the
UP or DOWN buttons. Press the OK button to enter the ‘Auto Power Off Delay’
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 1 Minute and 3 Minutes.
3. Press the OK button to confirm your selected setting.
4. After the selected amount of time the camcorder will power off.
To exit the settings menu, press the MENU button once and your camcorder will return to the
main status screen of the current mode.
4.4.4 Screen Saver
This setting allows you to set the length of time before the LCD Screen turns off automatically.
1. In any mode, press the MENU button twice. Select ‘Screen Saver’ by using the UP or
DOWN buttons. Press the OK button to enter the ‘Screen Saver submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 3 Minutes, 5 Minutes and 10 Minutes.
3. Press the OK button to confirm your selected setting.
4. After the selected amount of time the screen will power off. To wake the screen back
on, press any button.
To exit the settings menu, press the MENU button once and your camcorder will return to the
main status screen of the current mode.
4.4.5 Beep Sound
This setting allows you to enable or disable the sound when pressing a button.
1. In any mode, press the MENU button twice. Select ‘Beep Sound’ by using the UP or
DOWN buttons. Press the OK button to enter the ‘Beep Sound’ submenu.
To Next Page
Loading...
