Troubleshooting
10
10-11
Print-out is too light
The Toner Save mode has been
activated.
Check the setting in the printer
driver and in the printer menu.
Change the setting and try it
again.
The toner density is not set
correctly in the print menu.
Set the toner density to the
desired level, see chapter 4.
Insufficent toner in the cartridge. Lift out the toner cartridge and
shake it in order to improve the
distribution of the remaining
toner. If the problem persists, fit
a new cartridge, see chapter 9.
The toner cartridge is damaged. Remove the toner cartridge and
check it for damage. If
necessary, fit a new toner
cartridge, see chapter 9.
Print-out is too dark
The toner cartridge is damaged. Remove the toner cartridge and
check it for damage. If
necessary, fit a new toner
cartridge, see chapter 9.
The toner density is not set
correctly in the print menu.
Set the toner density to the
desired level, see chapter 4.
Blurred
background on the
print-out
The toner cartridge is damaged. Remove the toner cartridge and
check it for damage. If
necessary, fit a new toner
cartridge, see chapter 9.
Problem Possible cause Action
To Next Page
Loading...
