To Next PageTo Next Page
Need help?Do you have a question about the MINOURA RS-1100 and is the answer not in the manual?
Slide and secure the Upper Frame to the Lower Frame using Knob Bolt-A for height adjustment.
Fully open Leg-A until it locks, then open Leg-B and place the stand on the floor.
Fully extend the Arm and Seat Tube Stay, then insert the Seat Tube Support Bracket.
The BB Support Bracket automatically opens with the Arm to stabilize the bike.
Push the Lock Button on the Arm to fold the BB Support Bracket up or down.
Press the Lock Release Button on Leg-B to fold Leg-A.
Place the stand on a stable surface and lock the Arm Stopper into the angled hollow.
Position the left crank arm forward, lift the bike, and place the down tube onto supporters.
Support the seat tube with the Seat Tube Support Bracket, avoiding cable pinch.
Adjust Arm angle with Knob Bolt-B and sandwich the front wheel with Front Tire Supporters.
Place stand on floor, disengage Arm Stopper, fold BB Support Bracket, and turn Arm horizontally.
Place the top tube onto the Down Tube Supporters near the seat tube for stability.
General| Brand | MINOURA |
|---|---|
| Model | RS-1100 |
| Category | Racks & Stands |
| Language | English |
