MINOURA W-3100 - User Manual

Repairstand "W-3100" instructions manual
Tool Tray (option)
Back Knob
Clutch Release Lever
Upper Pillar
Lower Frame
Right Side Leg
Adjusting Screw
Clamp Adjust Knob
Clamp Lever
Clamp Jaws
Gear Clutch
Upper Pillar Holding Bolt
Lock Bolt
PARTS NAME
Left Side Leg
HOW TO ASSEMBLE W-3100
Required Tools: 1 x 13mm Spanner
1 x 6mm Hex Wrench
1 x 5mm Hex Wrench
Assemble both Legs to the Lower Frame with the supplied
M8x40 bolts and M8 Nylon Nuts.
M8x40 Cap Bolt
M8 Nylon nut
1

Summary

Parts Identification

Assembly Instructions

Assemble Legs to Lower Frame

Attach both legs to the lower frame using M8x40 bolts and M8 Nylon Nuts.

Check and Adjust Lower Frame Stability

Ensure all adjusting screws contact the floor evenly for optimal stability.

Assemble Clamp Jaw Unit to Upper Pillar

Secure the clamp jaw assembly to the upper pillar, tightening the back knob firmly.

Install Upper Pillar and Lock Bolt

Insert the upper pillar into the lower frame and secure with the lock bolt.

Operating Instructions

Opening and Closing Clamp Jaws

Use the clamp lever to open jaws and pull up to close securely on the bike.

Securing the Bike Clamp

Turn the clamp adjust knob clockwise to firmly hold the bike frame or seat pillar.

Rotating Clamp Jaws

Push the clutch release lever to rotate jaws; confirm ratchet engagement.

Product Information

Warranty Program Details

Details about the manufacturer's warranty coverage, limitations, and terms.

Contact Information

Provides contact details for customer support and headquarters.

Small Parts List

MINOURA W-3100 Specifications

General

Type	Workstand
Material	Steel
Weight Capacity	30 kg
Foldable	Yes
Color	Black
Clamp Type	Quick Release