—2—
SERVICE
This manual has been prepared to furnish the user with
sufficient detailed information to operate and maintain
the MINSTER SCRB-68 Eddy Current Coupling Con-
trols.
The SCR control described herein has been engi-
neered to provide automatic speed and torque regula-
tion of drives equipped with eddy current couplings.
This design offers a simplified method of adjustment
and includes the reliability of long life solid state com-
ponents. Inherent construction provides an uncompli-
cated approach to troubleshooting, should the need
occur. Through the use of extra, known-good, plug-in
modules and reference to the troubleshooting section
of this manual, most technicians should have little diffi-
culty maintaining the controls.
Individual Eddy Current Coupling Control modules, or
the complete control, may be returned to the factory for
checkout and repair. The SCR controls will be repaired
promptly at a reasonable cost.
If technical assistance is desired, please contact the
Minster Service Department.
DESIGN CHANGES
Manufacturing methods, state of the art, and availabil-
ity of certain components may change. Suppliers may
discontinue production of certain devices whenever
improved types become available to replace them. As
a result of these changes, some components furnished
in MINSTER controls may vary slightly from those illus-
trated in the manual. Troubleshooting procedures
should not change. If questions should arise concern-
ing the replacement of component parts, please con-
tact the Minster Service Department.
Copyright © 2008, 2011
THE MINSTER MACHINE COMPANY
Minster, Ohio 45865
Printed in the United States of America
Reproduction or use, without express permission, of editorial
or pictorial content, in any manner, is prohibited.
REGARDING WARRANTY
TERMS OF THE WARRANTY ARE FULLY DOCUMENTED IN THE MINSTER WARRANTY.
A COPY OF THAT WARRANTY IS INCLUDED IN THE COMPOSITE SERVICE
MANUAL; ADDITIONAL COPIES ARE AVAILABLE UPON REQUEST.
To Next Page
Loading...