Mio ALPHA - Alpha Usage and Care; Using Your Alpha In Water; General Care and Cleaning

MIO Alpha User Guide 11
Caring For Your Alpha
cleanIng your alpha
• Clean the sensor area and connection pads with mild soap and water about once a week.
• Do not scratch the sensor area. Protect it from damage.
• Wipe the watch with a damp cloth as needed. Use mild soap to remove oil or dirt.
• Do not expose your watch to strong chemicals such as gasoline, cleaning solvents, acetone,
alcohol, or insect repellents. Chemicals can damage the watch’s seal, case, and finish.
• After swimming, rinse your Alpha with tap water and dry it with a soft cloth.
other care tIps
• Do not attempt to disassemble or service your watch.
• Protect your watch from impact shocks, extreme heat, and extended exposure to direct sunlight.
• The Alpha is water-resistant only if the lens, buttons, and case remain intact.
Alpha Specifications
Clock: 12-hour
Timer: 9 hours 59 minutes 59 seconds
Max Readable Heart Rate: 220 BPM
Min Readable Heart Rate: 30 BPM
Operating Temp: 5°C to 45°C (41°F to 113°F)
Lens: Mineral Glass
Watchcase: PA+GF
Caseback: PC+CF
Caseback Contact Pads: SUS316
Strap: Silicon
Battery: 170mAh Lithium Polymer
Expected Battery Life: Up to 5 Years
Radio Frequency/Protocol: 2.4 GHz ANT+ or Bluetooth® Smart Wireless Technology