EasyManua.ls Logo

Mio DigiWalker C230 - Inserting a SD;SDHC;MMC Card

Mio DigiWalker C230
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Navigating on the Screen
To operate your device, touch the screen with your fingertip. You can perform the
following actions:
z Tap
Touch the screen once with your fingertip
to open items or select onscreen buttons or
options.
z Drag
Hold your fingertip on the screen and drag
up/down/left/right or across the screen.
z Tap and hold
Tap and hold your fingertip until an action
is complete, or a result or menu is shown.
1.5 Inserting a SD/SDHC/MMC Card
Your device has a slot where you can insert an optional SD/SDHC (Class2)
/MMC storage card.
To use a card, insert it into the slot, with the connector
pointing to the slot and its label facing the front of the
device.
To remove a card, first make sure that no application
is accessing the card, and then slightly push the top
edge of the card to release it and pull it out of the slot.
NOTE: Make sure that no foreign objects enter the slot.
11

Other manuals for Mio DigiWalker C230

Related product manuals