Important Safety Information
WARNING! This shower can deliver scalding temperatures. For
continued safe operation, follow all instructions, warnings and
cautions contained in this guide and on or inside the shower unit.
Failure to follow the instructions provided with the shower will
invalidate the guarantee.
PLEASE OBSERVE THE FOLLOWING TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY:
INSTALLING THE SHOWER
1. Installation of the shower must be carried out in accordance with
these instructions by qualied, competent personnel. Read all
instructions before installing the shower.
2. Isolate the electrical and water supplies before commencing
installation. The electricity must be isolated at the consumer unit
and the appropriate circuit fuse removed, if applicable. Mains
connections are exposed when the shower cover is removed.
3. DO NOT install the shower in areas with high humidity and
temperature (i.e. steam rooms and saunas).
4. DO NOT install the shower where it may be exposed to freezing
conditions. Ensure that any pipework that could become frozen
is properly insulated.
5. DO NOT connect the outlet of the shower to any tap, control valve,
trigger handset or showerhead other than those specied for use
with this shower. Only Kohler Mira recommended accessories
must be used.
6. DO NOT perform any unspecied modications, drill or cut holes
in the shower or ttings other than instructed by this guide. When
servicing only use genuine Kohler Mira replacement parts.
7. If the shower is dismantled during installation or servicing then,
upon completion, an inspection must be made to ensure all
electrical connections are tight and that there are no leaks.
USING THE SHOWER
8. The shower must be operated and maintained in accordance with
To Next Page
Loading...
