Need help?Do you have a question about the Mira Elite QT and is the answer not in the manual?
General| Temperature Control | Thermostatic |
|---|---|
| Minimum Running Pressure | 0.5 bar |
| Maximum Static Pressure | 10 bar |
| Phased Shutdown | Yes |
| Finish | White/Chrome |
| Valve Type | Thermostatic |
| Warranty | 2 years |
| Noise Reduction | Quiet Mark |
| Installation | Wall Mounted |
| Water Connection | 15mm |
| Energy Efficiency | Class A |
| Inlet Connection | 15mm |
| Certification | BEAB, WRAS |
| Water Pressure | 0.5 to 5.0 bar |
| Temperature Range | 30°C to 50°C |
Safety guidelines and procedures for installing the shower unit.
Safety guidelines and procedures for operating the shower unit.
Details on the product guarantee, coverage, and terms.
Specifies the intended use of the shower unit, e.g., domestic or commercial.
Details on plumbing requirements, pressure, and positioning for installation.
Guidance on pipework calculations, head loss, and material selection.
Electrical installation requirements, wiring, RCD, and switch types.
Step-by-step guide for physically installing the shower unit onto the wall.
Instructions for installing the slide bar, showerhead, and hose.
Procedure for cleaning the shower unit and replacing the water filter.
To Next Page
