To Next PageTo Next PageHow to fix a MIRKA DEROS 650CV when the LED doesn't light up?
If the MIRKA Sander LED does not light up when switched on, the power cord may not be properly connected either to the sander or to the mains socket. Ensure that the power cord is securely connected to both.
What to do if the break seal doesn't work on MIRKA DEROS 650CV Sander?
If the brake seal on your MIRKA sander isn't working, it could be due to a worn-out brake seal or a damaged spindle bearing. Inspect both the brake seal and the spindle bearing, and replace them if necessary.
General| Power | 350 W |
|---|---|
| Orbit | 5.0 mm |
| Weight | 1.0 kg |
| Pad Size | 150 mm |
| Vibration Level | 3.4 m/s² |
| Connectivity | Bluetooth |
| Speed | 4000 - 10000 rpm |
| Voltage | 220-240 VAC |
