MIRKA PROS - Declaration of Conformity; Required Personal Safety Equipment

4
Declaration of conformity
KWH Mirka Ltd
66850 Jeppo, Finland
declare on our sole responsibility that the product MIRKA® PROS 125 mm (5 in.) & 150 mm (6 in.)
(See “Product Conguration/Specications” Table for particular Model) to which this declaration relates
is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008.
Following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives
and consolidating Directive 2006/42/EC
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this
tool. Keep these instructions in a safe accessible location.
Required Personal Safety Equipment
Operating Instructions
Includes – Exploded view, Parts list, Spare parts,
Declaration of conformity, Important, Warning, Caution,
Product conguration/Specication, Proper use of tool,
Operating instructions, Safety precautions, Maintenance,
Trouble Shooting Guide
Manufacturer/Supplier
KWH Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.com
Place and date of issue
Ralf Karlström15.04.2013 Jeppo
Name Signature or equivalent marking of authorized person
Warning: Potential hazardous situation that may result in death or serious injury and/or
property damage.
Caution: Potential hazardous situation that may result minor or moderate injury and/or
property damage.
Safety Glasses Ear Protection Safety Gloves Face Mask