MIT 160

45
WARRANTY
Ekin Endüstriyel gives warranty to remove
material and workmanship defects arising
from production as of the date when pumps
with MIT brand that it produces are sold to
nal user. This warranty applies only when the
equipment is installed, operated and maintained
in accordance with Ekin Endüstriyel’s written
recommendations.
This warranty does not include general wear
and tear and Ekin Endüstriyel / MIT general wear
and tear or faulty installation, faulty application,
abrasion, corrosion, inadequate or improper
maintenance, negligence, accident, unconscious
maintenance or equipment not included within
warranty of Ekin Endüstriyel / MIT: (hoses,
connection components, pneumatic regulator.)
diaphragms having consumables, check valve
balls, ball slots and all the bolts (o-ring, z-ring)
are not within the scope of warranty.
It does not give any warranty for accessories and
equipment which are sold by Ekin Endüstriyel
but not produced by it and rejects warranties
tting for all old merchantability and a denite
purpose.
In no event, Ekin Endüstriyel / MIT accepts
any compensation, loss, damage and injury
responsibility under no circumstances, does
not accept any responsibility, liability, cost or
expenditure that are directly or indirectly related
to or occur due to use or non-functionality of
any product or Ekin Endüstriyel / MIT does not
accept any responsibility or liability regarding
direct, special, criminal or successive results
including but not limited to sales loss, prot
loss, pumped material loss, work slowdown,
production loss, contract loss, reputation or good
will injury whether Ekin Endüstriyel / MIT is aware
of or notied about potential damages.
This warranty is conditioned upon sending the
pump inner as completely emptied and cleaned
in a way not to damage the environment and
package by paying transportation fee to Ekin
Endüstriyel or authorized distributor to verify
equipment stated to be defective and notied
malfunction.
Equipment shall be returned to nal user
as prepaid transportation fee. If there is no
material or labor fault as a result of equipment
examination, repair operation shall be made
against a reasonable price that may include part,
labor and transport costs.
Ekin Endüstriyel / MIT website, introduction
marketing and technical literature and
declarations and data on materials are not
intentional for dening performance under real
use conditions of any product or at a time when
it was used in special applications, they do not
dene warranty, and these declarations and data
should not relied in determination of compliance
of the products for performance or special
applications under real use conditions.
All decisions on inefciency reason depend
only on Ekin Endüstriyel Pompa’s determination.
Prior approval should be received from Ekin
Endüstriyel to give back any product so as to
make evaluation on scope of the warranty.
In any case, Ekin Endüstriyel / MIT responsibility
regarding any single product shall be limited to
original price paid for the product.
No Ekin Endüstriyel / MIT authorized distributor
or any other person is authorized to make any
amendment on product warranty and expose
Ekin Endüstriyel / MIT apart from those submitted
here expressly to any responsibility or liability.
Extended Product Warranty
Pumps, produced with Ekin Endüstriyel / MIT
pump brand, are warranted against labor and
fabrication faults for 2 years as of invoice date.
Repair period of the pumps is 20 business days,
our company is not responsible for the products
not delivered within 60 days. Period elapsed in
repair is within the warranty period.In case of