MIT 160

1
SAFETY
Equipment Misuse Hazard
• Fluid to be transferred by the diaphragm pump is notied to authorized dealer or main dealer.
The dealer determines pump that is compatible for uid. Consult to Ekin Endüstriyel before
pumping any other uid than notied uid transfer. 444 35 46 (EKIN)
• Working pressure of the diaphragm pump is (max.) 7 bars. These pressure values should not
be exceeded. Otherwise, diaphragm pump may be damaged or is not included within the
scope of warranty.
• Use noise preventive ear plugs, protection goggles and gloves while installing the diaphragm
pump for the rst time or is put into use and as long as it continues to operate.
• While diaphragm pump is in operation and under pressure, do not lift the pump.
• Comply with necessary re instructions and electricity and security instructions. (Local,
National and Regional)
• Do not make any alteration on parts of the diaphragm pump. Use always (OEM) original spare
parts.
• If you used exible hose while installing the diaphragm pump, pay attention not to bend this
hose during transfer.
• Hose in suction part should not be exible during or after installing the diaphragm pump.
Flexible hoses may be bended during suction and stop suction.
• Fluid to be transferred by the pump and pump body and elastomer (parts manufactured from
rubber) materials should be compatible. If you do not sufcient information whether they are
compatible or not, consult to Ekin Endüstriyel. 444 35 46 (EKIN)
The User’s Manual booklet includes user and instructions and you should absolutely
read it before using diaphragm pump. Manufacturer company does not accept any
responsibility regarding damage of the pump due to improper use.
It is proposed that Ekin Endüstriyel service makes the entire service and maintenance
of the pump. 444 35 46 (EKIN)
The User’s Manual should be considered as an integral part of the pump and you should
keep it around you to apply whenever you want.
Manufacturer company does not accept any responsibility regarding damage of the
pump due to improper use.
Manufacturer can change product characteristics, technical dimensions and informations and diagrams without
notice. Any information provided on this page may not be copied or used without the permission of the manufacturer.
The manufacturer cannot be held responsible for technical information and diagrams.