OUTGOING CALL Lift handset - Press 9 - Dial number
REDIAL Lift handset - Press REDIAL key
INTERCOM CALL Lift handset - Dial EXT. NUMBER on dialpad
ANSWER A 2
ND
Press HOLD key to put the first caller on hold - Press ringing DN Key to
CALL WHEN ON receive the 2
nd
call - if needed, put 2
nd
caller on HOLD - Press
A CALL 1
st
DN Key and you will have the 1
st
caller back.
TRANSFER CALL (With live call) Press TRANSFER key - Dial EXT. NUMBER
Announce call and/ or hang up to transfer call (if the called extension does not
want call, before hanging up, press CANCEL key to retrieve the call
and take a message)
CALL PARK (With live call) Press CALL PARK key – Dial EXT. NUMBER – Hang up.
Make announcement as to where the call is Parked. This Parks the call at the dialed
Ext.
CALL PARK Press the CALL PARK RETRIEVE button – Dial the EXT. NUMBER where the
RETRIEVE call is parked – Press #.
CALL PICKUP Lift handset - Press CALL PICKUP button and enter the extension where call is
holding or ringing.
PAGE Lift handset - Press PAGE - Make announcement - Hang up
CALL FORWARD Press the FWD key - Dial the EXT. NUMBER to receive your calls – Press
ACTIVATE
CANCEL CALL FWD Press FWD key – Press DEACTIVATE – Press CLOSE key
DO NOT DISTURB While on hook - Press DND key
CANCEL DND While on hook - Press lit DND key
CONFERENCE CALL Establish 1
st
call – Press CONFERENCE key – Establish 2
nd
call – Press
ADD HELD – Press Flashing CALL KEY of the caller that is on hold.
PROGRAM STATION Press the BLUE SETTINGS key – Press SETTINGS – Press PROGRAMMABLE
SPEED DIAL KEYS – Press the key that you would like to program – Press SPEED CALL – Enter
the information including the telephone number preceded by 9.
TO USE STATION Press the programmed Speed Dial key to make the outbound call
SPEED DIAL
Volume Control
Cancel Key
Activates Handsfree Mode
Redial Key
Mutes Microphone
Hold Key
Opens Settings Menu
Transfer Key/ Conference
Message key—
Lights when you
have new messages.
MITEL 3300
TELEPHONE QUICK REFERENCE GUIDE
To Next Page
Need help?
General
