Mitel 5320e - Elements of Your Cordless Module and Accessories; Handset;Headset Combinations

5320e/5330e/5340e SIP User and Administrator Guide
- 44 -
Elements of Your Cordless Module and Accessories
Feature Function
1) Cordless Module (either DECT or
Bluetooth)
Attached to the back of the phone, the module contains a
Light Emitting Diode (LED) indicating that a cordless device is
in use; also indicates the state of pairing between the module
and a cordless device.
2) Cordless Headset (photo shows
DECT headset)
Cordless handsfree operation for calls. If you are using a
cordless headset, you do not need to use the handset.
3) Cordless Headset Charging Cradle
(DECT only)
Provides power to recharge the cordless headset battery.
4) Cordless Handset Charging Plate Provides power to recharge the cordless handset battery.
Replaces the handset cradle plate supplied with the phone for
corded handsets.
5) Cordless Handset Cordless operation for handset calls. (You can transfer from
the phone handset to the cordless headset at any time.)
6) Cordless Module Pairing Button Initiates pairing between the Cordless Module and a cordless
accessory.
7) Cordless Headset Cradle Cable
(DECT only)
Connects to the Cordless Module to provide power to the
charging cradle.
Handset/Headset Combinations
The following combinations of corded and cordless headset and handset are supported on the
5330e/5340e IP Phone:
 Corded handset only
 Corded handset and corded headset
 Cordless handset only
 Cordless handset and cordless headset
 Corded handset and cordless headset
 Corded headset and cordless handset
The DECT Cordless Handset, DECT Cordless Headset, and Bluetooth Handset are all Mitel-
branded accessories available only from Mitel. Bluetooth headsets are third-party accessories
available from a variety of manufacturers.