New functionality 2.10.3
•
Described in the “
CR
” and “
New Feature
” section below
CR
Factory reset shall reset all frequency bands
Components: All Products
Background:
Customer is using different DECT frequency bands depending on where they are. When a certain frequency
has been set in the admin menu, there is currently not possible to change back to any other frequency.
The limitation that factory reset is not making it possible to enter a new frequency band is requested to be
removed.
Solution:
Now it is possible to change the DECT frequency on a factory reset device even if the frequency was
previously set to a certain value
Improvements
Display driver adjustments for DH6
Components: 5613
Background:
Missing pixels can be seen in the display during use of DH6 units equipped with the new displays (display ID:
7c)
Display ID info is found under "Device info > Hardware" menu in the handset.
Solution:
Display driver has been updated to fix a problem with pixels on DH6 LCD
NCR
PDM help text for parameter Settings/Messaging/Call Priority is confusing
Components: 5614
Background:
The PDM parameter help text is unclear and to some extent misleading for the parameter
Settings/Messaging/Call Priority. It can for example be understood as it is possible to suppress the message
To Next Page
Loading...
