If the device is already subscribed to a communication
system, the serial numbers (IPEI) of the card and the DECT
phone are automatically exchanged. This guarantees that the
DECT phone remains fully functional after removal of the card
from the DECT phone, though it has a different serial number
(IPEI). Please note that all subscription data on the card is
deleted locally from the DECT phone; also, the printed serial
number in the DECT phone and the card number no longer
match, which, however, does not affect the functionality of the
device or card.
If you place a card in a DECT phone that has a third-party
device data set, you are prompted during startup to indicate
whether you want to use that card's data. If you decide to use
the card, a one-time restart of the DECT phone takes place
and the data of the card will be used for this DECT phone.
Please note that the original data of the DECT phone remains
unchanged, and thus there is no exchange of serial numbers.
DEVICE DATA ON THE CARD
The following local device data (menu entries) is stored on the
card (see the User's guide for the system for the submenu
entries):
MITEL 620D, 630D
• System -> Subscription / IPEI / Auto search
• Settings -> Display (except "Brightness")
• Settings -> Illumination (except "LED Indications")
• Settings -> Device options
• Time / Alarms -> Format settings
• Audio (except "Noise detection", "Loud environment" ,
"Volume" / "Melodies" for Messages)
• Private directory, VIP-List
• Programmed keys
To Next Page
Loading...
