Mitel 6800 Series - Advanced SIP Settings

Operational, Basic, and Advanced Parameters
A-95
ADVANCED SIP SETTINGS
PARAMETER –
http digest force login
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION Enables and disables the display of a LOGIN key on the phone’s idle
screen.
Note: After the server has authenticated the phone, this parameter
must be set to “0” in order for the server to send the default profile to
the phone.
FORMAT Boolean
DEFAULT VALUE 0 (disable)
RANGE 0 (disable)
1 (enable)
EXAMPLE http digest force login: 1
PARAMETER –
sip explicit mwi subscription
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION If the IP phone has a message waiting subscription with the Service
Provider, a Message Waiting Indicator (MWI) (LED or display icon)
tells the user there is a message on the IP Phone. You can enable
and disable MWI by setting this parameter to the following:
"0" to disable
"1" to enable
FORMAT Boolean
DEFAULT VALUE 0
RANGE 0 (disable)
1 (enable)
EXAMPLE sip explicit mwi subscription: 1
PARAMETER –
sip explicit mwi subscription
period
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION The requested duration, in seconds, before the MWI subscription
times out. The phone re-subscribes to MWI before the subscription
period ends.
FORMAT Integer
DEFAULT VALUE 86400
RANGE 30 - 2147483647
EXAMPLE sip explicit mwi subscription period: 30