8
3.8 RESIDUAL RISKS
During the normal working cycle and while maintaining the
machine, the operators are exposed to several residual risks
that, because of the operations own nature can not be totally
eliminated.
• Risk of finger crushing in the working areas of vertical
and frontal clamps
3.9 PLATES
The warning plates carry out safety functions can not be
removed, covered or damaged.
To see the plates or adhesive signs location, consult the
Fig.10.2-D
Table 3.8 A- Types of plates
Plate concerning the machine’s characteristics
Adhesive sign concerning the finger danger zone
Adhesive sign concerning the behaviour to be kept during
the working cycle
Adhesive sign concerning the behaviour to be kept during
the working cycle
4. INSTALLATION
4.1 SHIPPING AND HANDLING
The shipment must be performed by professionally qualified
staff. The machine has to be shipped in a safe way to avoid
any damage to its parts.
• All the protections and guard devices must be properly
closed and clamped.
• The machine has to be shipped like it is positioned for
installation.
• Before shipment it is necessary to lubricate the parts
which are not painted.
• According to the type of shipment, it is necessary to
protect the machine from any jarring impact or stress
Picture 4.1A – machine handling indications
Machine total weight: about 70 Kilos
Lifting the machine must be performed
by 2 operators.
Any damage of the machine caused during its shipment or
handling is not covered under warranty.
Repairs or replacement of damaged parts are charged to the
customer.
To Next Page
Loading...