Why won't Mitsubishi Electric DX-TL2500E perform Alarm Recording?
If your Mitsubishi Electric Recording Equipment will not perform Alarm Recording, check if the unit is in timer recording stand-by mode (indicated by the TIMER light). Also, verify that the peripheral switches, etc., are connected correctly.
Why won't the Compact Flash Card perform playback on Mitsubishi Electric DX-TL2500E Recording Equipment?
If the Compact Flash Card will not perform playback on your Mitsubishi Electric Recording Equipment, ensure that the media is correctly inserted, the correct playback device is selected, and the data is recorded in FSM2 format.
Why won't Mitsubishi Electric DX-TL2500E respond to PC control?
To troubleshoot why your Mitsubishi Electric Recording Equipment is not responding to PC control, verify that the is set correctly, ensure the unit and computer are connected correctly, check for any defects in the connecting cable, and confirm that the proper connecting cable is being used.
What to do if the copy device/archive device does not respond on Mitsubishi Electric Recording Equipment?
If the copy device/archive device does not respond with your Mitsubishi Electric Recording Equipment, verify that the recording medium has been inserted correctly into the unit, check if the unit is currently loading the recording medium, ensure the correct playback device is selected, confirm the recording medium's write-protect has been removed, verify that the “ID4•ID5” is set to “HDD”, ensure the power supply of peripheral recording device is ON, and confirm that the SCSI cable and termination are set correctly.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | DX-TL2500E |
| Category | Recording Equipment |
| Language | English |
Details various recording modes, settings, and compression options.
Covers unit handling, power cord, ventilation, and cabinet cleaning.
Guides through the automatic setup process for initial configuration.
Explains the initialization process for HDD and peripheral devices.
Guides through setting recording interval and picture quality for normal recording.
Explains how to search recorded video by date and time.
Instructions for setting the current date and time accurately.
Explains how to select cameras for motion detection setup.
Covers setting detection areas for motion detection.
Details setting recording modes, triggers, and camera selection for alarms.
Covers HDD repeat recording, playback, and check settings.
Explains how to view the list of system warnings and errors.
Details setting and managing password locks for operation control and data clearing.
Explains how to activate and use the simple lock feature.
How to search recorded data using index signals for normal or alarm events.
Explains how to search alarm recording signals and playback at intervals.
Guides on searching and displaying alarm recording and emergency recording start times.
Details copying data to/from external devices and Compact Flash Cards.
Explains MIRRORING, PARTITION, and LONG PRE-ALARM HDD modes.
Details performing pre-alarm recording for up to 30 minutes before an event.
Lists common problems during installation and recording with solutions.
Addresses playback failures and issues with Compact Flash cards.
Details various warning displays, their causes, and corrective actions.
To Next Page
