Mitsubishi Electric MELDAS MDS-R-V2-2020 - Servo Drive Unit Type

1. Introduction
1 - 4
1-2-2 Servo drive unit type
MITSUBISHI
TYPE
SERVO DRIVE UNIT
MDS-R-V1-40
POWER 1.0kW
INPUT 6A 3PH 200-230V 50/60Hz
0.1A DC24V
OUTPUT 6.6A 3PH 155V 0-240Hz
MANUAL *BNP-C3045
S/W BNDXXXXXXXXX H/W VER.*
SERIAL# XXXXXXXXXXX DATE 03/11
MITSUBISHI ELECTRIC CORPORATION JAPAN
X X X X X X X
Motor type
Rated input
Rated output
Current state
Serial No.
Rating nameplate
2-axis servo drive unit Compatible motor HF Series
Low-
inertia
Medium-inertia
(1) Motor
type
MDS-R-
Unit width
Drive
shaft
44 74 53 103 153 203 353
V2-2020 L/M    □
M    □
V2-4020
L { { {  □ □
V2-4040
60mm width
L/M { { {  □ □
M { { {  □ □
V2-6040
L   □
V2-6060 L/M   □
M { { {  □ □
V2-8040
L { { 
M   □
V2-8060
L { { 
V2-8080
90mm width
L/M { { 
(Note 1)  indicates the motor corresponding to each servo drive unit.
(Note 2) ○ indicates the motor that can be combined with the drive unit capacity of one rank up. It is selected
when using the 2-axis drive unit, etc.
(Note 3) □ indicates the motor that can be combined with the drive unit capacity of one rank down. Note that the
maximum torque, stall torque and rated speed are limited.
MDS-R-
(1)
1-axis servo drive unit Compatible motor HF Series
Low-
inertia
Medium-inertia
(1) Motor
type
MDS-R-
Unit width
Drive
shaft
44 74 53 103 153 203 353
V1-20 L    □
V1-40
60mm width
L  □ □
V1-60 L   □
V1-80
90mm width
L { { 